triumphs
[Top] [All Lists]

[TR] Valve Lash Adjustment Method

To: triumphs@autox.team.net (Win)/6.0.13_GA_2944)
Subject: [TR] Valve Lash Adjustment Method
From: terryrs@comcast.net
Date: Sat, 2 Jun 2012 12:24:57 +0000 (UTC)
Delivered-to: triumphs-archive@autox.team.net
Delivered-to: triumphs@autox.team.net
List-archive: <http://autox.team.net/pipermail/triumphs>
List-help: <mailto:triumphs-request@autox.team.net?subject=help>
List-id: Triumph Sports car discussion <triumphs.autox.team.net>
List-post: <mailto:triumphs@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/triumphs>, <mailto:triumphs-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/triumphs>, <mailto:triumphs-request@autox.team.net?subject=unsubscribe>
The book I'm using describes adjusting valves when the intake and exhaust are 
at the point of balance, at which moment you can set both valve lashes to .010. 
 

I hadn't noticed that before.  I had always set the valves on the exhaust when 
the intake was completely down, and vice versa.  

Question:  Does it make any difference?  

Terry Smith, '59 TR3A  TS 58667
New Hampshire

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>