Dave, t he whole stator tube assembly is turning. The horn assembly is
engaging the notches in the tube. The horn assembly is new - bought from one
of the big three at a VTR auction and seemed "tight when turning it" before
the assembly into the stator. I've stripped a couple of brass nuts trying to
tighten it. It's frustrating. I do have the other car to compare and it's
fine....
Tom
----- Original Message -----
From: Dave1massey@cs.com
To: triumphs@autox.team.net
Sent: Tuesday, July 3, 2012 11:34:38 AM
Subject: Re: [TR] steering wheel nut
Is the stator tube actually turning or is the horn assembly not engaging
the notches in the stator tube? B The stator tube nut may be plenty tight and
your problem lies elsewhere.
Dave
In a message dated 7/3/2012 9:53:40 AM Central Daylight Time,
tfansher@comcast.net writes:
> I used really big channel lock pliers......to tighten the nut with the
> stator
> tube in place. Anyone have any tricks to get the stator tube nut tight
> enough
> without stripping. The a horn assembly still wants to turn with the wheel,
> so
> no cancelling of the turn signals.
** triumphs@autox.team.net **
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net
|