triumphs
[Top] [All Lists]

Re: [TR] TR3A rear spring "fulcrum" bolt

To: "'Art McEwen'" <amcewen2@cogeco.ca>, <triumphs@autox.team.net>
Subject: Re: [TR] TR3A rear spring "fulcrum" bolt
From: "Randall" <TR3driver@ca.rr.com>
Date: Sat, 8 Sep 2012 17:26:01 -0700
Delivered-to: triumphs-archive@autox.team.net
Delivered-to: triumphs@autox.team.net
In-reply-to: <504BB224.1050300@cogeco.ca>
List-archive: <http://autox.team.net/pipermail/triumphs>
List-help: <mailto:triumphs-request@autox.team.net?subject=help>
List-id: Triumph Sports car discussion <triumphs.autox.team.net>
List-post: <mailto:triumphs@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/triumphs>, <mailto:triumphs-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/triumphs>, <mailto:triumphs-request@autox.team.net?subject=unsubscribe>
References: <504BB224.1050300@cogeco.ca>
Sender: triumphs-bounces@autox.team.net
Thread-index: Ac2OBUb01xgKU5P+TTCW623r8QSWWQAHAP3Q
Worth noting, perhaps, that the head of the pin is tapped for a puller.  I
used a bottoming tap to clean out the tapped hole, then some hardened
threaded rod, nuts & 'setup' washers from MMC plus sockets and a bit of pipe
to form a makeshift puller.

Worked for me, on two different cars now.  I also soaked the area in PB
Blaster for several weeks, and beat on things from time to time to help the
PBB penetrate.

-- Randall  

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>