Re: [TR] TR2/3 glove box mounting

[Dave1massey@cs.com]

I used that press-stud to mount the bracket to the dash support.  There is 
a small hole in the box for the screw that attaches the box to the bracket.  
A U-style clip on nut eliminates the need of trying to feed a nut on the 
blind side of the box.

Dave

In a message dated 9/19/2012 9:07:59 PM Central Daylight Time, 
agraham@execulink.com writes: 
> Hello List:
> Can anyone help with the glove box mounting - especially the rear "L" 
> shaped bracket? Again, not sure where this bracket fastens to the under 
> dash. I assume the threaded bolt portion extends into the glove box and 
> is fastened by a nut and washer (10-32?). Wondering about the end of the 
> bracket - with a speed nut on it and where this fastens to the under 
> dash area.
> Thanks for any help.

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net