MAN !! I spend my life explaining it is U'prichard, not Up-richard - and
then I go signing my name UPrichard. Oh well......
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Andrew Uprichard
Sent: Wednesday, June 05, 2013 6:00 PM
To: 'Alexander Delis'; 'Triumph List'
Subject: Re: [TR] Tenax
Roadster factory have some which have a screw going through to the tenax
itself. Like you say, a great solution - but be careful you don't crack the
windscreen glass when you drill.
Andrew UPrichard
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Alexander Delis
Sent: Wednesday, June 05, 2013 5:07 PM
To: Triumph List
Subject: [TR] Tenax
List
I seem to remember tenax studs that were long enough to go through the
windscreen frame. You would drill out both sides of the frame with a drill
press and be able to put a nut on the inside- useful if the threads in the
frame have been stripped (like some of mine).
I can't find them now anywhere.
Does anyone have a link?
TIA
Alex
1958 TR3 TS33884LO
1968 GT6 KC10303
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|