For the non-purists like me, I switched all my guages (not speedo or rpm) to
Sunpro. The Sunpro has an electronic sensor that fits perfectly into the
thermostat.
Terry
> On May 3, 2018 at 9:34 AM Carl-TR <cfmtr3a at verizon.net> wrote:
>
> If you're not interested in keeping it original, you could always switch
> over to a TR4 gauge and sensor setup.
>
> Sent from BlueMail http://www.bluemail.me/r?b=12874
> On May 3, 2018, at 12:27 AM, Hoyt Duff <hoytduff at gmail.com
> mailto:hoytduff at gmail.com > wrote:
>
> > >
> > Isn't there a "fix" to replace the tube with a part from NAPA? Not
> > the
> > entire gauge, but just the capillary tube? I remember reading about
> > such a fix, but can't find it in my bookmarks.
> >
> > On 11/27/17, Randall <TR3driver at ca.rr.com> wrote:
> >
> > > > > The "capillary" tube is mostly filled with
> > ether, a very volatile
> > > substance.
> > > The tiniest crack will let it leak out, ruining the gauge. I
> > > have also had
> > > several movements fail from overheating. One of the posters
> > > on another
> > > forum has suggested that the movement comes apart inside when
> > > needle hits
> > > the top of the scale, but I have not investigated that.
> > >
> > > > >
> >
> > > > > -- Randall
> > >
> > > > >
> > >
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/terryrs at comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180503/0b7493c1/attachment.html>
|