triumphs
[Top] [All Lists]

[TR] vacuum line TR6

Subject: [TR] vacuum line TR6
From: ptegler at verizon.net (Paul Tegler)
Date: Mon, 21 May 2018 11:06:54 -0400
References: <c099896099b74598a05fd7fc61899863@DR-EX13-MLB01.datacenter.dataresolution.net>
perhaps milliseconds of delay at most. The volume of air space you're 
talking inside the hose is perhaps 1/5 of one cylinders travel to create 
the vacuum difference that 'might' be encountered. Only at WOT and high 
rpms might you see a delay effect

ptegler


On 5/21/2018 10:44 AM, Pete Arakelian wrote:
> The question is what effect the diameter of the vacuum line for the 
> distributor???s capsules has?
> The original line between the carbs and the distributor vacuum 
> capsules is a very small diameter.??? I have seen them replaced by much 
> larger diameter lines.??? Would this not affect the function of the 
> capsules???? The larger line, requiring more volume of air to be removed 
> to cause the same amount of movement, would diminish the affect of the 
> vacuum applied by the carb, reducing the effectiveness of the capsules.
> Right???? Or has it been too long since my physics studies?
> Peter Arakelian ??? 1971 TR6
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler at 
> verizon.net

-- 
Paul Tegler
ptegler at verizon.net  www.teglerizer.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/triumphs/attachments/20180521/35aae3c7/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>