No noticeable effect. If anything the vacuum modules may act more quickly
with a larger line which can make the engine seem a bit twitchy when coming off
of the retard. I know a guy who actually stuck a restrictor in a line to slow
it all down. But there is unlimited vacuum available so the larger volume will
not be a problem.
Dave Massey
-----Original Message-----
From: Pete Arakelian <arakelianp at mossmotors.com>
To: 'triumphs at autox.team.net' <triumphs at autox.team.net>
Sent: Mon, May 21, 2018 9:52 am
Subject: [TR] vacuum line TR6
The question is what effect the diameter of the vacuum line for the
distributor?s capsules has?
The original line between the carbs and the distributor vacuum capsules is a
very small diameter. I have seen them replaced by much larger diameter lines.
Would this not affect the function of the capsules? The larger line,
requiringmore volume of air to be removed to cause the same amount of movement,
would diminish the affect of the vacuum applied by the carb, reducing the
effectiveness of the capsules.
Right? Or has it been too long since my physics studies?
Peter Arakelian ? 1971 TR6
** triumphs at autox.team.net **
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180521/5320ccc0/attachment.html>
|