triumphs
[Top] [All Lists]

[Fot] Ignition Coil ??

Subject: [Fot] Ignition Coil ??
From: william.tobin31 at verizon.net (Bill Tobin)
Date: Tue, 21 Aug 2018 08:42:43 -0400
References: <1655a2d220d-1e9c-20995@webjas-vab159.srv.aolmail.net>
Hi Bob, are you using the correct ohm coil? My notes say that with 
points and resistor a 1.5 ohm coil should be used.

I use a Pertronix Flame Thrower. $40 or so from Jegs or others.

Also with points, make sure the condenser is good. A faulty condenser 
will cause your symptoms too. Ask me how I know this!

Cheers, Bill




On 8/20/2018 9:50 PM, Bob Totten via Fot wrote:
> Amici,
>
> So this weekend I believe my 2 year old coil crapped out, last run at 
> Saturdays autocross there was sputtering and backfire.? At home barely 
> could get the car off the trailer and into the garage.? Similar 
> symptoms from couple years ago and found 20 year old E-Coil decided to 
> retire.? So my question is -? what is the popular coil in use by my 
> brethren ?
>
> Currently an Epoxy Pertronix black coil, with Ballast Resistor, in a 
> Spitfire with a 1500 engine 11 to 1 comp and a Mallory Dual Point 
> Distributor.
>
> Curious,
>
> Bob T
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31 
> at verizon.net
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180821/e1da3988/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>