No worries. As long as all four are equally tight/torqued youâ??re OK. Quite
possibly that stud is longer or just not threaded as far into the head.
Bill
Sent from my Handspring Treo
On Sep 24, 2018, at 7:38 PM, Paul Dorsey <dorpaul1@gmail.com> wrote:
It doesn't really bother me, but I've noticed something odd about my engine;
Of course there are four 9/16" nuts holding the rocker arm to the head.
Initially all 4 nuts were tight, however, nut #4 (rear nut) was two or three
threads higher on it's stud. It's okay that it's higher, right? In time, I
intend on finding the torque value for all four nuts. Is this listed in the
workshop manual?
Thanks, Paul Dorsey
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|