The TR6 trailing arms are not interchangeable. The runner bump stop is part of
the arm on the TR6 and is part of the FRAME on the 4A. I believe that is the
only difference, but it makes it non-interchangeable.
-Tony
Sent from my 1837 Babbage Analytical Engine
> On Oct 4, 2018, at 10:00 AM, Alex & Janet Thomson <aljlthomson@charter.net>
> wrote:
>
> Will TR-6 trailing arms work? I have a set.
>
> Alex Thomson
> Woodbury, CT.
> 203-266-4067
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of Anthony
> Rhodes
> Sent: Thursday, October 04, 2018 9:31 AM
> To: triumphs@autox.team.net
> Subject: [TR] TR4A trailing arms
>
> I am looking to buy a pair of trailing arms for a TR4A. My studs are in bad
> shape and I am looking for replacement arms with decent studs. I will
> likely fit the Goodparts axles with 3/8" studs so the studs themselves
> currently in the replacement arms are not critical. The aluminum of the
> trailing arms does need to be in good shape.
>
> Does anyone know of some trailing arms that I can buy!
>
> -Tony
>
> Sent from my 1837 Babbage Analytical Engine
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/aljlthomson@charter.net
>
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|