Oh I do love good news!
> On January 14, 2019 at 7:47 AM Randall <tr3driver@ca.rr.com> wrote:
>
>
> As I recall, you undo the flare nut that holds the hard line to the fitting
> on the front of the soft line, then remove the hex nut that clamps the soft
> line fitting to the frame and pull the fitting out of the tab. That frees
> up the soft line to turn, so you can unscrew it from the 3-way without
> taking the 3 way loose or disturbing the other hard lines.
>
> Use two wrenches (one to keep the fitting from turning), so you don't twist
> either hard or soft lines. You'll probably want an assortment of "flare
> nut" wrenches, which grip all 6 corners but have a slot so they can slide
> over the lines.
>
> <https://www.amazon.com/Craftsman-Standard-Metric-Wrench-Set/dp/B00KF253OG>
>
> -- Randall
>
> > I suppose it's necessary to undo the union box so the flex
> > pipe can screw in without being impeded by the twisting of
> > the rubber flex hose. That about right?
> >
>
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|