triumphs
[Top] [All Lists]

Re: [TR] TR4 Hood Badge

To: "'John Macartney'" <John.Macartney@Ukpips.org.uk>, "'wbeech'" <wbeech@flash.net>
Subject: Re: [TR] TR4 Hood Badge
From: "Keith Stewart" <keithstewart@bell.net>
Date: Mon, 17 Feb 2020 15:32:10 -0500
Cc: 'Triumphs' <Triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: Triumphs@autox.team.net
References: <025b01d5e5ac$6addbcf0$409936d0$@gmail.com> <000001d5e5b5$e658fad0$b30af070$@flash.net> <43C35461-66CC-41CD-A32D-1004B7CEB718@Ukpips.org.uk>
Thread-index: AQIcZfAQ+sDb30Js7ILd2lEZ6PbQGwJiW6bEASN1ojundqc+YA==
The original securing mechanism was small plastic inserts (like those ground 
bullet connectors that have a hole through the bottom for the ground wire to 
protrude and bend over). Once the hole(s) is elongated, these would not work 
but spire nuts as John suggests or spring clips should hold it secure.


Keith Stewart
keithstewart@bell.net



-----Original Message-----
I agree with Bill Beecher. Elongate one of the holes with a round needle file 
and then touch in the bare metal with a small dab of of body colour to impede 
rust. The retaining spire clips will hold it tight and snug.



** triumphs@autox.team.net **

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>