triumphs
[Top] [All Lists]

Re: [TR] 4A engine question

To: Q <HDRider570@att.net>
Subject: Re: [TR] 4A engine question
From: Jim Henningsen <trguy75@gmail.com>
Date: Sun, 7 Feb 2021 18:23:18 -0500
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <c14caf16-6f33-4b1e-9f83-9e638f1d1700@att.net>
Edward:
Thanks. Thatâ??s a great idea as I have a few of those in the spares bin.  
Thanks, Jim

> On Feb 7, 2021, at 5:36 PM, Q <HDRider570@att.net> wrote:
> 
> Pretty common problem.  I bought a TR4 that had almost a 1/4" deep grove 
> in the shaft.
> 
> 
> The Factory manual calls for engine mount shims to align the hand crank/Rad 
> hole/front dog.  I use the "Horseshoe" type ones that are used on the TR4 and 
> TR6 body mounts.  Quite convenient as you do not have to lift the engine off 
> the threaded portion of the mount.  I had a stack of them laying around but I 
> think that TRF has them for sale.
> 
> Edward Hamer
> 
> Petaluma CA
> 
> ** triumphs@autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
<Prev in Thread] Current Thread [Next in Thread>