[6pack] FW: Leaky card - part II

[Navarrette, Vance]

        Marty:

        Unless you want to have problems in the future, replace the float. If
Moss doesn't carry it, try Joe Curto (joecurto.com). He will have it for
sure.

        Vance

    Vance Navarrette
    Cogito Ergo Zoom
    I think, therefore I go fast

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Martin Romagni
Sent: Sunday, October 19, 2008 9:16 AM
To: 6pack at autox.team.net
Subject: [6pack] Leaky card - part II

Hey everyone,

<snip>
So today, I removed the float bowl to get at the problem.
When I went to pry the float loose to test it, the steel clip that
holds the float came off too  yikes! It appears that
the PO, had glued the steel clip in place.

Here is the picture
http://s111.photobucket.com/albums/n148/romagnim/?action=view&current=CIMG104
8.jpg

So it looks like my choices are to 1) throw out that carb and replace
it with another or can I glue that clip back in place? I was thinking of
using JB Weld to glue it back.

Thoughts and thanks in advance?


Marty