[6pack] Clutch slave pushrod

shawn loseke shawn.loseke at gmail.com
Fri Oct 1 07:40:34 MDT 2010


The most neglected part of the clutch system is the pedal box and the
clevis attaching the clutch master to the pedal. I have seen those
clevis pins so worn that they look like crankshafts. The bushings that
the clutch and brake pedal pivot on can also wear out and is often
overlooked. Which is a shame considering how easy it is to pull out
the pedal assembly. I know I said this before but reiterating it for
the benefit of all. More slop up there equal less stroke in the
master, which mean less stroke from the slave.

Shawn

On Fri, Oct 1, 2010 at 8:02 AM,  <Vsnively at aol.com> wrote:
> Thanks Jim. The pin was my first thought. I replaced everything mechanical
> at clutch time, I think I even used the special hardened pin from TRF.
>
>
> In a message dated 10/1/2010 8:55:16 AM Eastern Daylight Time,
> im_sloane at hotmail.com writes:
>
> Vic,
> Mine has the exact same problem, clutch release point almost on  the floor.
> It's at the shop now, tranny out, fixing the pin on the  thing-a-ma-gig
> that has the hollowered out hole, causing the angle of  the 3 hole lever to
be
> wrong. I used to have about a dozen washers  used as a shim to push the
> slave cylinder out about an inch, but it still  didn't really help much. I
can
> concur that using that top hole won't  work for long either. I'm sure
looking
> forward to no longer having to switch  it off to get it in 1st or Reverse.
>
> Check out this site.  Everything you ever wanted to know and even a
> description of someone else who  tried the dozen washer shim approach and
even
> lengthened the push rod.
>
>
_http://www.buckeyetriumphs.org/technical/clutch/ClutchHydraulics/Clutch_Hyd
> raulics.htm_
>
(http://www.buckeyetriumphs.org/technical/clutch/ClutchHydraulics/Clutch_Hydr
aulics.htm)
>
> Sloane  :)
> 69-Six
>
>
>> From: Vsnively at aol.com
>> Date:  Thu, 30 Sep 2010 21:36:12 -0400
>> To: v.navarrette at comcast.net;  6pack at autox.team.net
>> Subject: Re: [6pack] Clutch slave pushrod
>>
>> Thanks Vance
>>
>>
> =
> _______________________________________________
>
> 6pack at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/6pack/shawn.loseke@gmail.com


More information about the 6pack mailing list