[Autojumble] Message rec'd STAN Carlisla Import show, my thoughts Used ignition switch
doddk at mossmotors.com
Mon May 23 10:46:43 MDT 2011
Too busy trying to build a car, to put anything up for sale.
58 MG Magnette
ps. Good to hear from you Pete.
From: autojumble-bounces at autox.team.net
[mailto:autojumble-bounces at autox.team.net] On Behalf Of Pete Groh
Sent: Monday, May 23, 2011 9:00 AM
To: autojumble at autox.team.net; Stan
Subject: Re: [Autojumble] Message rec'd STAN Carlisla Import show, my thoughts
Used ignition switch
Stan, I did see your posting.
I was not set up as a vendor in PA this past
I did attend thurday
thru Saturday. On my shopping list was any early British ignition switch with
letters/number on the face of the insert. I also need a trunk handle that
take a FA key, number stamped on the steel shaft will be in the number range
There were vendors with switch with the key code number on the face
of the insert, some with keys, some without. I had a list of all of my
FA, FP, FS series lock insert in my possession. When I seen a vendor I knew
who had a switch without a key, suggest that I pull the lock insert out of
switch, insert a duplicate lock insert with a key code and a wilmot breeden
key for his re-sale. In two cases, could not remove the lock insert out of
switch since the wafer/pins had corrosion. I could not position the lock
insert to depress the pin to removed it.
It appears that vendors could sell a
used switch with the lock insert removed. The buyer may want a spare for his
car, and can replace his present lock insert into the used switch.
Ellicott City, Md. 21042-3647 U.S.A.
--- On Mon, 5/23/11, Stan
<datstan at juno.com> wrote:
> From: Stan <datstan at juno.com>
[Autojumble] Message to see if list is running
> To: autojumble at autox.team.net
> Date: Monday, May 23, 2011, 8:50 AM
> I subscribe to another car team list
and it has been dead for more than a
> week. Checking to see if autojumble is
More information about the Autojumble