[British-cars] Non-LBC - glue floor coving seam

[Ron L'Herault]

The appropriate weight would be an MG or Triumph transmission.  This is a
British car list, after all.

Ron L 8-)

-----Original Message-----
From: british-cars-bounces at autox.team.net
[mailto:british-cars-bounces at autox.team.net] On Behalf Of Eric J Russell
Sent: Saturday, March 27, 2010 10:08 AM
To: Dwade Reinsch; british-cars at autox.team.net
Subject: Re: [British-cars] Non-LBC - glue floor coving seam

Apply some masking tape (painters tape tends to not leave residue) to the 
edges of the seam to protect against any glue that might squeeze out. Gently

lift the loose edges and clean out any debris/old glue. Use a syringe to 
squirt appropriate glue under edges (i.e vinyl floor seam sealer: 
http://www.thisoldhouse.com/toh/article/0,,216707,00.html ) Lay a piece of 
wax paper over the seam and put something weighty over it. (a stack of 
magazines works well). Rest & recuperate.

Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message ----- 
From: "Dwade Reinsch" <dreinsch at swbell.net>
To: <british-cars at autox.team.net>
Sent: Saturday, March 27, 2010 9:29 AM
Subject: [British-cars] Non-LBC - glue floor coving seam


> Keeping the little wife happy is important part of success with LBC's, so 
> when
> she has a seam opening up in the floor covering in her kitchen, it's a LBC
> problem.  :-)
>
> Just regular vinyl floor covering about 10 years old.  One short (5 
> inches)
> opening at a seam.  I need to inject glue down into the seam so it will 
> stick
> back down.
>
> Any suggestions as to glue or methods of putting it down into the seam?
>
> Thanks for all the help I've received over the years.
>
> Dwade
_______________________________________________
British-cars at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/british-cars/lherault@bu.edu