[Roadsters] getting into a locked roadster trunk
Tim
tputland at charter.net
Sat Mar 17 07:08:32 MDT 2012
some where, I have to assume on 311s.org, there are instructions on how
to make a little tool used to open a trunk by going through one of the
license plate bolt holes. I did if for practice a few years ago and it
worked pretty easily.
tim
On Sat, Mar 17, 2012 at 7:21 AM, chalsted at comcast.net wrote:
> I know this has been discussed before, don't recall seeing the way I
> did it recently...straight down from the lock there is a rubber plug
> in the trunk- pop that out, take a tire iron- not a 4 way- will need
> to be longer than the stock roadster one...run it straight up inside,
> just to the left of center and find the lock by feel...go to the left
> slightly and you can push the "blade" in between the clip and the
> lock...when you get it in place, give a quick hit from underneath or
> just twist and jam on it a bit and the clip will pop out and lock will
> basically fall out intact. could do the same thing with a long
> screwdriver probably. Craig ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/datsun-roadsters/tputland@charter.net
More information about the Datsun-roadsters
mailing list