[Fot] crank dampers 6 cyl

Lamp, Randy H rhlamp at babcock.com
Wed Apr 2 07:34:51 MDT 2008


Scott,

 

The manufacturer was Fluidampr and I purchased it from Summit
Racing in
Akron Ohio.  You might want to contact them, Fluidampr, direct to
get
the details worked out and then order from one of the big suppliers.
With all the import stuff these days ,they might have something that
would
adapt to the Spitfire crank. I was surprised at how little had to
be done to
the small block Ford damper to make it fit the six cylinder
Triumph crank
shaft. You can e-mail them at support at fluidampr.com  or
call them at 716
592-100.  Summit racings phone number is 800230-3030. 

 

Good luck,
Randy

 

________________________________

From: Scott Cypher
[mailto:srcypher at mac.com] 
Sent: Tuesday, April 01, 2008 6:22 PM
To: Lamp,
Randy H
Cc: Scott Janzen; Terry and Cindy; fot at autox.team.net
Subject: Re:
[Fot] crank dampers 6 cyl

 

Does anyone know if one was ever ID'd for a
1500 4cyl?

Randy, I'd appreciate contact information, if you have it, on
the vendor
you refer to below, so I can contact them....

 

Thanks
-Scott Cypher

spitfireracer at xsmail.com

SCCA #57 HP Spitfire 1500 #362573
Reading, PA

http://gallery.mac.com/srcypher

 

Shipwright's Disease.
Its a nasty affliction, particularly when owns a
british car.  Then it can
never be cured.

 

On Apr 1, 2008, at 1:02 PM, Lamp, Randy H wrote:
Scott,

If I remember correctly ,I talked to the folks who made them and we
decided on the one for the small block Ford based on its physical size

and
the diameter of the Triumph six cylinder crankshaft where the damper
mounts. I thought it worked very well and will do it again on my current
GT6 ,even if I only drive it on the street and run a few track events.
R. Lamp

 

 




-----------------------------------------
This
message is intended only for the individual or entity to which
it is addressed
and contains information that is proprietary to The
Babcock & Wilcox Company
and/or its affiliates, or may be otherwise
confidential.  If the reader of
this message is not the intended
recipient, or the employee agent responsible
for delivering the
message to the intended recipient, you are hereby notified
that any
dissemination, distribution or copying of this communication is
strictly prohibited.  If you have received this communication in
error, please
notify the sender immediately by return e-mail and
delete this message from
your computer.  Thank you.



More information about the Fot mailing list