[Fot] Was Weber carbs now SU Questions

[Bill Babcock]

I'd recommend a good fuel pressure regulator.

On Nov 2, 2008, at 11:03 AM, Glenn Franco wrote:

> Wow !!
> Thanks for the fast response
>
> I found a slightly bent needle on one of the carbs and noticed that  
> both had witness marks from coming in contact with the jet.
> Polished the needles with 600 grit and the pistons now drop without  
> interference.
>
> Both carbs flood, 110 octane running out of the air horn when shut  
> down.
>
> Measured fuel pump pressure is at 4psi. I'm going to try an lower it  
> by backing off the adjusting stud.
>
> Thanks Glenn Franco
> 72 spit race car finding one problem after another.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill at kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog