[Fot] Was Weber carbs now SU Questions
Tony Drews
tony at tonydrews.com
Sun Nov 2 12:55:48 MST 2008
You should run the stock style needle valves and not the "grose jet"
valves which are operated using little ball bearings. The stock
style needle valves can handle more pressure.
- Tony
At 01:03 PM 11/2/2008, Glenn Franco wrote:
>Both carbs flood, 110 octane running out of the air horn when shut down.
>
>Measured fuel pump pressure is at 4psi. I'm going to try an lower it
>by backing off the adjusting stud.
>
>Thanks Glenn Franco
>72 spit race car finding one problem after another.
More information about the Fot
mailing list