[Fot] Isihara-Johnson crank scraper - windage tray screen for TR4

[Henry Frye]

Steve,

Is this a TR3/4 motor?

What rods are you using?

Thanks!

Henry Frye - Sent via Phone
860.508.3118

-----Original Message-----
From: steve <colordog.1 at earthlink.net>
Sent: Tuesday, April 28, 2009 2:09 PM
To: Henry Frye <henry at henryfrye.com>; fot at autox.team.net <fot at autox.team.net>
Subject: Re: [Fot] Isihara-Johnson crank scraper - windage tray screen for
TR4

I have run four race weekends with my IJ scraper / tray / Teflon setup.  So
far no problems.  I am curious to inspect everything but I have no plans to
pull the pan for now.

~Steve

-----Original Message-----
>From: Henry Frye <henry at henryfrye.com>
>Sent: Apr 28, 2009 5:10 AM
>To: fot at autox.team.net
>Subject: [Fot] Isihara-Johnson crank scraper - windage tray screen for TR4
>
>Racers,
>
>I am interested in sharing experiences with anyone who bought and has
>run one of the Isihara-Johnson crank scraper - windage tray screen
>combos for a TR3/4 engine with non-stock rods. I ran mine in my
>ill-fated VIR engine build, and while I do not think it caused my
>failure I do have concerns...
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot