[Fot] Trunion seals

[Charly Mitchel]

Good day all,
I'm rebuilding my TR6 front suspension and I've got all the bushings and for
the inner joints and I'm looking for a solution to the trunion pivot seal
parts.  The stock system consists of a distance tube, a nylon bushing, a flat
washer, a 'o' ring and a cupped washer on each side of the lower wishbone arm.
The equates to 18 pieces to make up this seal/joint.  I don't see a trunion
bushing/seal kit available from the major suppliers, i.e. Moss, VB, TRF, BPNW
etc.
Is there a easier better way?  I believe these are the same on all TR's and
Spits and maybe other Triumphs.  What are you guys doing for your racecars?

Charly Mitchel
TR6 #44