[Fot] Trunion seals

MadMarx tr4racing at googlemail.com
Sat Jan 29 09:42:35 MST 2011


I combined the TR4 version with the later ones:
I just flipped around these o-rings from the TR4 to seal it.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
Auftrag von Charly Mitchel
Gesendet: Samstag, 29. Januar 2011 17:22
An: Friends
Betreff: [Fot] Trunion seals

Good day all,
I'm rebuilding my TR6 front suspension and I've got all the bushings and for
the inner joints and I'm looking for a solution to the trunion pivot seal
parts.  The stock system consists of a distance tube, a nylon bushing, a
flat
washer, a 'o' ring and a cupped washer on each side of the lower wishbone
arm.
The equates to 18 pieces to make up this seal/joint.  I don't see a trunion
bushing/seal kit available from the major suppliers, i.e. Moss, VB, TRF,
BPNW
etc.
Is there a easier better way?  I believe these are the same on all TR's and
Spits and maybe other Triumphs.  What are you guys doing for your racecars?

Charly Mitchel
TR6 #44
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com



More information about the Fot mailing list