[Fot] Turner racer looking for help...

[Jason Ostrowski]

I think The hub nuts he is looking for are on the bottom of this page they
should fit all the triumph Hubs they are 7/16.
http://www.wirewheelsource.com/JagTriumphHubs.html.
hope this helps.
Jason Ostrowski
Friendly Ghost Racing

On Wed, Jun 8, 2011 at 12:00 PM, <BillDentin at aol.com> wrote:

> Amici...
>
> A fellow SVRA/VSCDA racer name John Ruth contacted me looking for help with
> fasteners for TRIUMPH wire wheel adapters.  I have zero knowledge
> concerning wire wheels for TRIUMPHs.  Can anyone help him?  His request
> appears
> below, including his email address (and in the Copy to; box as well).
>  Thanks.
> Bill Dentinger
>
> <<<-Hello Bill
>
> Hoping you can help - I have a Turner Mk III that uses a lot of Triumph
> parts - one part I am trying to get confirmation on is the nuts that hold
> the
> knock-off adapter onto the hub.   My Turner has special hex nuts that have
> a
> conical seat (or bottom )  - the Turners were made with all kinds of other
> companies components - though I suspect the nuts in question were sourced
> from Triumph.  As mentioned, the Hex nuts are special ones that have a
> conical
> bottom to seat onto the hub (after the nut is tightened onto the stud and
> bears against the hub).  I know you race a TR3 and hope you can confirm the
> type (design) of the special nuts to attach the knock-off extension to the
> hub.  I need to get hold of some new nuts - since 4 of mine parted company
> with
> the car!  John Ruth (jdruth at att.net) ->>>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/jason@multivintage.com