[Fot] Electric connections

[Bob Bownes -Seiri]

I follow the NASA guidelines and crimp everything with the proper size
connectors and crimp tool, then put heat shrink on, then fasten down the wire
with adell clamps or other suitable devices every 6-8". Not a single
electrical related failure ever except when I skipped one or more of the
steps. But that was a rain light. :)



On Aug 7, 2013, at 15:24, Tony Drews <tony at tonydrews.com> wrote:

> I solder anything I can.  I usually run some heat shrink tubing over the
joint between the connector and the wire after soldering.  I make an effort to
minimize the number of connections / connectors too.  Every connection is a
possible point of failure.
>
> Tony Drews
>
> At 02:13 PM 8/7/2013, Christopher Bock wrote:
>> Amici
>>
>> What is the best practice for electric connections, crimp or solder?
>>
>> Chris
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/bownes@web9.com