[Fot] Electric connections

[Tim Murphy]

If there is flexing of the wire near the connection I think a crimp is
better due to the solder connection making the wire very stiff at the
connection and the flexing will tend to break the wire at that point.  The
key to a good crimp connection is to use a good "industrial" crimper, not
the one typically found on a wire strippers.  FWIW

Tim

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Christopher Bock
Sent: Wednesday, August 07, 2013 2:13 PM
To: FoTTriumph
Subject: [Fot] Electric connections

Amici

What is the best practice for electric connections, crimp or solder?

Chris
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com