[Fot] A-Type O/D Conversion Shift Tower Issue

[Glenn Franco]

Thanks for the suggestions
Problem solved and shift tower drilled and tapped.
Glenn

On 11/17/2013 5:10 PM, Glenn Franco wrote:
> Hi All
>
> I'm converting an early TR6 Trans to Overdrive.
> The issue I'm having is drilling and tapping the shift tower for the 
> lock out switches.
> The installed back up lamp switch has a thread pitch of 2mm per my 
> thread gauge and the O.D. is just shy of 16 mm.
> I'm assuming a 16mm x 2 tap. Is this correct?
>
>
> The second issue I'm having is the oil pump plunger refuses to come 
> out of the housing.
> The eccentric on the output shaft was completely worn out. I'm 
> guessing there's an issue there.
> Any suggestions for removal?
>
> Thanks in advance
> Glenn
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/gaf3@charter.net