[Fot] Fw: Detroit Locker

[Joe Alexander]

Rick,

I assume you have access to CMM equipment and programs like SolidWorks?


Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Feb 26, 2014, at 7:22 PM, "Rick Parent" <rick.parent at att.net> wrote:
>
> I will be making them myself, it is very hard to have anything done anymore.
I am planning on making some for Datsuns also, other Triumphs may be another
option, depending on the interest. But the Spit will be first test.
>
> Rick
>
> ----- Original Message ----- From: "Robert M. Lang" <lang at isis.mit.edu>
> To: "Rick Parent" <rick.parent at att.net>
> Sent: Wednesday, February 26, 2014 10:36 AM
> Subject: Re: [Fot] Detroit Locker
>
>
>>
>> Hi - If that pans out (you can get some made), I'd love to see if this
could be done for big TR's too.
>>
>> Are you looking at having Detroit Locker make them? I only ask because I
tried contacting them in the past (maybe 1999 timeframe) and at that time
there was no interest in making a run of any size... bear in mind that this
was a "soft inquiry", but I was willing to at least try to get something
going.
>>
>> regards,
>> rml
>>
---------------------------------------------------------------------------
>> Bob Lang              Triumph TR6!!            |  This space for rent
>> Former NER Solo Chair                          |
>> Voice:617-253-7438                             |  Cell: 339-927-4489
>>
---------------------------------------------------------------------------
>>
>>> On Wed, 26 Feb 2014, Rick Parent wrote:
>>>
>>> Yes, I would like to build some of these. I want some for our cars and I
also
>>> think there is a market for them. We are running welded diffs as the best
>>> option at the moment. The Quaif diffs are a very expensive joke on a
Spit.
>>> The DL allows the car to be free while turning which is a great advantage
over
>>> the welded diff. It also is much easier to push around the garage ;-)
>>>
>>> Rick
>>> ----- Original Message -----
>>> From: John Styduhar
>>> To: Rick Parent
>>> Sent: Wednesday, February 26, 2014 9:21 AM
>>> Subject: Re: [Fot] Detroit Locker
>>>
>>>
>>> Rick, when you say "run" does that mean you plan to manufacture these
units.
>>> I have a Detroit Locker for a TR4 and need some spare parts.
>>>
>>>
>>>
>>> On Wed, Feb 26, 2014 at 8:40 AM, Rick Parent <rick.parent at att.net> wrote:
>>>
>>>   Does anyone have a Detroit Locker for a Spit / GT6 I could buy or
borrow?
>>> I
>>>   would like to make a run of them.
>>>
>>>   Thanks, Rick
>>>   _______________________________________________
>>>   fot at autox.team.net
>>>
>>>   http://www.fot-racing.com
>>>
>>>   Donate: http://www.team.net/donate.html
>>>   Archive: http://www.team.net/archive
>>>   Forums: http://www.team.net/forums
>>>   Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/lang@isis.mit.edu
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com