[Fot] Al-Fin Drums

[Todd Redmond]

Yep!  That's the loving i meant.   
Thanks John. 

Sent from my iPhone

> On Mar 5, 2014, at 9:51 AM, John Styduhar <johnstydo at gmail.com> wrote:
> 
> II think the loving that Todd was talking about is to enlarge the Z-car
> drum's center hole slightly to slip over the axle hub and to machine the
> outside lip of the stock TR brake backing plate to fit into the recess
> between the drum's steel lining and the aluminum casting around the
> perimeter of the drum.  That worked for me.
> 
> 
>> On Tue, Mar 4, 2014 at 7:22 PM, Robert M. Lang <lang at isis.mit.edu> wrote:
>> 
>> Hi,
>> 
>> I was putting together a list of "Stuff" for a possible new Triumph racer
>> and I noticed none of the usual places (US suppliers) have al-fin drums
>> listed now...
>> 
>> Anyone care to comment on availability?
>> 
>> We're talking 9" drums for TR6 and probably TR4.
>> 
>> I saw them on the Brit sites, but not on the US web sites.
>> 
>> Regards,
>> rml
>> ------------------------------------------------------------
>> ---------------
>> Bob Lang              Triumph TR6!!            |  This space for rent
>> Former NER Solo Chair                          |
>> Voice:617-253-7438                             |  Cell: 339-927-4489
>> ------------------------------------------------------------
>> ---------------
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/fot/johnstydo at gmail.com
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/alfetta95@optonline.net