[Fot] Steering rack failure at Kcup

Bill Babcock ponobill at gmail.com
Tue May 20 14:47:27 MDT 2014


I have one I installed in a street TR3 Im building. Im going to machine a
retainer to pin the steel housing to the casting. I thought it looked pretty
iffy when I first looked at it.

On May 20, 2014, at 1:19 PM, <rkramer3 at austin.rr.com> <rkramer3 at austin.rr.com>
wrote:

> Bob Blake was very lucky to not have been involved in a serious incident at
that spot on the track.
>
> Bob Kramer
> rkramer3 at austin.rr.com
>
> ---- Tony Drews <tony at tonydrews.com> wrote:
>> I'd pull it and put an OEM one back in.  You may be able to drill and
>> tap a hole to put one or more pins in it, but total steering failure
>> is not a good thing!
>>
>> Tony Drews
>>
>> At 02:40 PM 5/20/2014, Chuck Arnold and/or Kathleen Kelley wrote:
>>> Is there any fix for this?  I have one of those in the car now!  Should I
>>> pull it?
>>>
>>>
>>> On Tue, May 20, 2014 at 11:04 AM, Greg And Alison Blake <
>>> ablake2 at austin.rr.com> wrote:
>>>
>>>> This weekend at the Kastner Cup race at ECR Dad's steering rack let go
>>>> right
>>>> after the left hand turn at the end of the back straight. Fortunately no
>>>> one
>>>> was injured and the car was ok. Ed Barnard came to the rescue with a
quick
>>>> drive to his shop for a OEM rack pulled off the shelf. Dad was ready for
>>>> racing come Sunday morning.
>>>>
>>>> The failed rack was an aftermarket rack. We don't know the orgin of the
>>>> rack
>>>> as it was in the car when he purchased it in 2009.
>>>>
>>>> The rack tube pulled out of the pinion housing.  In looking at the rack
>>>> tube,
>>>> this appears to be a poor design. The steel tube is simple pressed into
the
>>>> aluminum pinion casting. There is no evidence of a positive means of
>>>> securing
>>>> the rack tube to the casting.
>>>>
>>>> Needless to say, I'll be sourcing a OEM rack to replace my quick rack
>>>> before
>>>> the next race.
>>>>
>>>> As has been stated before, if you are using a replacement rack, check it
>>>> carefully.
>>>>
>>>> This could have been a very disastrous failure.
>>>>
>>>> We have pictures if you want them.
>>>> _______________________________________________
>>>> fot at autox.team.net
>>>>
>>>> http://www.fot-racing.com
>>>>
>>>> Donate: http://www.team.net/donate.html
>>>> Archive: http://www.team.net/archive
>>>> Forums: http://www.team.net/forums
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/fot/triosan@gmail.com
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/billb@bnj.com



More information about the Fot mailing list