[Fot] pilot bushing

[Bill Babcock]

Find a punch that’s very close to the diameter of the pilot—an old input shaft is great. Take a bunch of toilet paper, soak it in water and push it into the bushing. When you can’t push more, use the punch to hammer it in, then add more. Keep repeating until the pressure of the wet paper pushes out the bushing. Sounds crazy, works great. Just did it recently. 
> On Aug 16, 2015, at 1:37 PM, kkjjk at aol.com wrote:
> 
> Hello all-  Any advice on how to remove a GT6 pilot bushing?  The flywheel is removed and the engine is still in the car?  Thanks-- Jay De Pol_______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill@ponostyle.com
> 
> 

Bill Babcock
Bill at ponostyle.com
Editor: Ponostyle
Celebrating Water

Editor: Xtreme Geezer
Fitness and Fun After Forty
503.936.7660
http://www.PonoStyle.com
http://www.Xgeez.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150816/ac80f37d/attachment-0001.htm>