[Fot] Weber help

[McKearn McKearn]

Hi.
  Thanks for the replies.
   I have not tried an carb cleaner or starting fluid or anything like that
yet.  I thought I'd try to get a seal one more time.  The butterflies are
closed and the carbs are close to balanced. The intake flanges have been
machined flat however the gasket is probably a VB junk gasket. After
disassembly I see that the gaskets seal surfaces are not attached to the
head or the manifold from heat and crush like they normally are. Not hot
enough or not tight enough?
                     Pat


On Mon, May 25, 2015 at 5:12 PM, Roger Williams <coelacanth.racing at gmail.com
> wrote:

> Are all the carbs butterflies closed? Are all the car balanced?
>
> On Mon, May 25, 2015 at 4:01 PM, McKearn McKearn <mckearn2 at gmail.com>
> wrote:
>
>> Hi All.
>>     I'm having trouble getting my intake manifold gasket to seal. Have
>> three Webers on GT6 and no. 3 carb wont respond to mixture screw
>> adjustment. I have removed that carb and disassembled it. Cleaned and
>> checked everything and reassembled it and it still acts the same. I am
>> assuming there must be an intake leak. Am I missing something?
>>  Thanks.  Pat
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/coelacanth.racing@gmail.com
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150525/103c561a/attachment-0001.htm>