[Fot] Head question on TR-6

[Jim Gray]

Russ,

Yes you can adjust the volume that way but you can always go to a thicker
head gasket to get you there. You also have to know the deck height of the
block

it's going on.

jim g

 

  _____  

From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Spitfire Racing
Sent: Sunday, October 18, 2015 7:33 AM
To: 'Fot'
Subject: [Fot] Head question on TR-6

 

For the past 20 years or so I have had a NOS Circle B 6 cylinder head on a
shelf in the parts room. For some reason I assumed it was for a TR-6 and
would be ideal as a starting point for an eventual TR-250 project. Must to
my disappointment I find it is a Mk2 GT-6 head. Likely it would afford too
high a CR sitting on a 2500cc engine in stock condition. 

The question is... Is it unreasonable to think I can open up the combustion
chamber to bring the CR down to ~ 10.5:1 using it on a 2500cc application ?

Any of you have the combustion chamber volume to achieve this using flat top
pistons ??

 

Anyone out there have done this before? No point in trying to reinvent the
wheel.  Serial number on head is 517528.

Snow on the ground this AM and temps in the 20s has me already in the winter
project mode!

 

Thanks,

 

Russ Moore

Spitfire #49

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20151018/7ba0a626/attachment.htm>