[Fot] Calico Coatings

[Brad Eells]

Which coating are we talking about for bearings...their site has about 50 different types...

Brad Eells
Sent from my iPhone

> On May 14, 2019, at 7:46 AM, Rick Parent via Fot <fot at autox.team.net> wrote:
> 
> Haha, that's funny, I also use that same coating for my oil pumps, it makes quite the difference in pressure and longevity. There is some break in procedure before it can be installed though.
> 
> On Tuesday, May 14, 2019, 10:14:04 AM EDT, John Styduhar <johnstydo at gmail.com> wrote:
> 
> 
> If I asked my engine builder, he would snicker and ask me to leave.
> 
> On Tue, May 14, 2019 at 10:05 AM Rick Parent via Fot <fot at autox.team.net> wrote:
> Install as is, enjoy!
> 
> On Tuesday, May 14, 2019, 9:56:04 AM EDT, Alexandre Camoletti via Fot <fot at autox.team.net> wrote:
> 
> 
> Listers, following the Calico Coatings (main bearings coatings) discussion last year, two questions:
> 
>  
> 
> 1.The coating adds some thickness (variable on demand but approx. 5-10 microns), does that need to be taken into consideration in the clearance?
> 
>  
> 
> 2.The coating adds also thickness on the edges of the bearings, this will tend to increase the ID of the fitted bearings. Should the edges be sanded to remove the coating and restore the original ID?
> 
>  
> 
> Thanks for your suggestions here!
> 
> Kind regards from Europe (Geneva, Switzerland)
> 
> Alex Camoletti
> 
>  
> 
> De : Fot [mailto:fot-bounces at autox.team.net] De la part de Tony Drews via Fot
> Envoyé : vendredi 19 janvier 2018 04:03
> À : Scott Janzen; 'Friends of Triumph' Triumph
> Objet : Re: [Fot] Coated Bearing source
> 
>  
> 
> I buy my TR-4 tri-metal bearings from BP Northwest and then send them to Calico Coatings for that part.  Not exactly what you're looking for, but Calico Coatings is who I've used for over 10 years and am very happy with.  Just be sure to mail them them Denver North Carolina - I once sent to Denver Colorado instead.  That was a delay of game.
> 
> https://www.calicocoatings.com/
> 
> Tony Drews
> 
>  
> 
> On 1/18/2018 10:47 AM, Scott Janzen via Fot wrote:
> 
> anyone aware of a source for high quality tri-metal engine bearings for the GT6/TR6, preferably already coated, so that I don’t need to subsequently send them out?
> 
>  
> 
> Also, recommendations on coatings/vendors who do same?
> 
>  
> 
> thanks,
> 
> Scott
> 
> 
> 
> 
> 
> _______________________________________________
> fot at autox.team.net
>   
> http://www.fot-racing.com
>   
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>   
>   
>  
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rick.parent@att.net
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4abrad@gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190514/5222a630/attachment-0001.htm>