[Fot] Venolia Piston bore clearance

[Jason Sukey]

Thanks Dave,
I saw that also, but have no idea what alloy my pistons are made from.

Jason

On Wed, Feb 19, 2020, 11:57 AM David Gott <triumphsix at yahoo.com> wrote:

> Hi Jason,
>
> They have this listed on their website:
>
> PISTON CLEARANCE: With 2618 alloy, top of skirt .008 to .010. Bottom of
> skirt: .005 to .007". Air cooled engines usually require more clearance.
>
> Now I’m not sure if they are talking about forged pistons, or otherwise.
> I have forged Venolias in my TR4, and they certainly have more clearance
> cold than non forged pistons, if that helps.    Here’s a link:
>
> http://www.venolia.com/technical.html
>
> Hope that helps!
>
> Dave Gott
>
>
> Sent from Yahoo Mail for iPhone
> <https://overview.mail.yahoo.com/?.src=iOS>
>
> On Wednesday, February 19, 2020, 10:43 AM, Jason Sukey via Fot <
> fot at autox.team.net> wrote:
>
> I'm looking for the recommended bore clearance for my GT6 Venolia
> pistons.  No answer from their phone number, and I'm seeing that they have
> gone out of business.  Does anyone else running Venolia's happen to have
> the recommended spec?
>
> Thanks,
> Jason Sukey
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/triumphsix@yahoo.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200219/6fdd93e2/attachment-0003.htm>