[Fot] FW: Flywheel wt & crank harmonics -TR3/4

[fubog1]

Note that lighter pistons and connecting rods 
 That's a BIG gain, it gets some of that recip/bending load out of the mains. 
Glen
 
 
-----Original Message-----
From: timmmurphh--- via Fot <fot at autox.team.net>
To: fot at autox.team.net
Sent: Thu, May 21, 2020 7:07 pm
Subject: [Fot] FW: Flywheel wt & crank harmonics -TR3/4

<!--#yiv2112036761 _filtered {} _filtered {} _filtered {}#yiv2112036761 #yiv2112036761 p.yiv2112036761MsoNormal, #yiv2112036761 li.yiv2112036761MsoNormal, #yiv2112036761 div.yiv2112036761MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:"Calibri", sans-serif;}#yiv2112036761 a:link, #yiv2112036761 span.yiv2112036761MsoHyperlink {color:#0563C1;text-decoration:underline;}#yiv2112036761 .yiv2112036761MsoChpDefault {font-size:10.0pt;} _filtered {}#yiv2112036761 div.yiv2112036761WordSection1 {}-->   From: timmmurphh at gmail.com <timmmurphh at gmail.com> 
Sent: Thursday, May 21, 2020 6:06 PM
To: 'TeriAnn J. Wakeman' <tjwakeman at gmail.com>
Subject: RE: [Fot] Flywheel wt & crank harmonics -TR3/4  The weight of the flywheel will definitely affect the harmonic frequency.  The heavier the flywheel, the lower the harmonic frequency will be.  The flywheel contributes a significant amount to the total rotating inertia due to its weight and that the weight is at greater radius than the other rotating masses.  Inertia increases as the square of the radius.  It is not a linear function of the radius.  An RPM of 5200 was mentioned as the harmonic resonance.  I had always heard that it was more like 6300 RPM.  I have never seen a calculation for it.  It would be complex.  Note that lighter pistons and connecting rods would tend to lower the harmonic frequency as they would reduce the inertia in the engine.  Tim Murphy  From: Fot <fot-bounces at autox.team.net> On Behalf Of TeriAnn J. Wakeman via Fot
Sent: Thursday, May 21, 2020 2:44 PM
To: FOT <fot at autox.team.net>
Subject: [Fot] Flywheel wt & crank harmonics -TR3/4  Something I have wondered about for years.Does the weight of the flywheel affect the RPM and intensity of harmonics inherent in a TR3/4 stock crank? I've never found an answer to that question.TeriAnn_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200522/85e9f871/attachment-0003.htm>