[Fot] Windshield install

[Scott Janzen]

thanks, everyone - I had remembered putting the gasket on the car first, then the glass into it.  all the advice has been the reverse - gasket on glass, then the assembly onto the car.
Appreciate the collective wisdom!


> On Mar 28, 2022, at 12:29 PM, Scott Janzen via Fot <fot at autox.team.net> wrote:
> 
> I’m putting a polycarbonate windshield in the GT6 to shed a few pounds.  The issue is the rubber surround from Moss motors - it seems small, doesn’t quite reach all four corners when I install it in the frame.  Anyone else had this issue, or am I missing something?  This should be the same install/part for TR4-TR6-Spitfire- GT6, as they all used the same windshield. This stuff isn’t very elastic - If I try to pull it into the corner, it pulls out of somewhere else.
<IMG_0956.jpg><IMG_0955.jpg><IMG_0957.jpg>
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/triumphbob@aol.com
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220328/3f023332/attachment.htm>