[Fot] Windshield install

[Scott Janzen]

thanks, this one is coated and the manufacturer says windex is fine.


On Mar 28, 2022, at 3:42 PM, Jim Gray <toodamnfunky at comcast.net> wrote:

Scott,
I can’t help with the fitment issue but if you have never had a poly windshield be careful. There is a process for cleaning them. I saw a brand new one get ruined 1st day when somebody just wiped it down with a super-soft cloth and windex. It was in a 911 RSR and the guy lost his job on the spot because he was supposed to know the proceedure.
jim g
 
From: Fot <fot-bounces at autox.team.net <mailto:fot-bounces at autox.team.net>> On Behalf Of Scott Janzen via Fot
Sent: Monday, March 28, 2022 10:26 AM
To: 'Friends of Triumph' Triumph <fot at autox.team.net <mailto:fot at autox.team.net>>
Subject: [Fot] Windshield install
 
I’m putting a polycarbonate windshield in the GT6 to shed a few pounds.  The issue is the rubber surround from Moss motors - it seems small, doesn’t quite reach all four corners when I install it in the frame.  Anyone else had this issue, or am I missing something?  This should be the same install/part for TR4-TR6-Spitfire- GT6, as they all used the same windshield. This stuff isn’t very elastic - If I try to pull it into the corner, it pulls out of somewhere else.
<image001.jpg><image002.jpg><image003.jpg>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220328/1551dfd2/attachment.htm>