[Fot] Spitfire wheels

[Scott Janzen]

Hi, Mark, these may not be what you are looking for, but they’ll fit.  They are 13x5.5”, 3.75” dia mounting stud circle, backspace - 4” to edge of rim, 3.5” to inside tire bead surface.  They are beautifully refinished wheels that came with a GT6 project car I picked up, and I will not be using them.  Never mounted since refinishing. $400 for the set of four.  I have good shipping boxes, or can deliver to Lime Rock, WG or Summit Point on the VRG race dates.
The other ones I would check out, that I run on my race GT6, are Revolution wheels.  They’ll set them up to whatever backspace you want and are pretty reasonable.  The race wheels have steel seats for the lug nuts. My recollection is they are under $200 each, including shipping. Tariffs may have changed that! https://revolutionwheels.com/product-category/race/

Scott Janzen



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20250811/277287c9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0294.jpeg
Type: image/jpeg
Size: 81031 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250811/277287c9/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0299.jpeg
Type: image/jpeg
Size: 97368 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250811/277287c9/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0300.jpeg
Type: image/jpeg
Size: 79177 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250811/277287c9/attachment-0002.jpeg>