[Healeys] Speedo drive pinion seal

[Michael Salter]

In order to replace the lip seal in a speedo pinion( at the back of the
overdrive) it is necessary to extract a tiny steel pin from the brass
housing.
[image: image.png]

Has anyone figured out a way to do this so that the housing can be
separated?

M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20221123/02d98bdb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 648413 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20221123/02d98bdb/attachment.png>