[Healeys] Advice and guidance needed for OD reinstallation

[Leonard Berkowitz]

Hi. All
I finally figured out how to get the OD out of my BJ7. Now for getting the new one installed. I found two rings sitting on the output shaft which I believe are fitted to the adapter plate. (See pics attached). The problem is going to be how to keep them in place while maneuvering the new OD into place. I was thinking of using either white lithium grease or wheel bearing grease.
Any suggestions?
Thank you in advance for any help you can offer.

Len Berkowitz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250827/1a03fe9b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0877.jpeg
Type: image/jpeg
Size: 1594421 bytes
Desc: IMG_0877.jpeg
URL: <http://autox.team.net/pipermail/healeys/attachments/20250827/1a03fe9b/attachment-0003.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0878.jpeg
Type: image/jpeg
Size: 2134289 bytes
Desc: IMG_0878.jpeg
URL: <http://autox.team.net/pipermail/healeys/attachments/20250827/1a03fe9b/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0880.jpeg
Type: image/jpeg
Size: 2904786 bytes
Desc: IMG_0880.jpeg
URL: <http://autox.team.net/pipermail/healeys/attachments/20250827/1a03fe9b/attachment-0005.jpeg>