[Healeys] Advice and guidance needed for OD reinstallation

[Michael Salter]

Those "rings" are the Bellville washer and shim that go into the adaptor plate to eliminate end float of the mainshaft bearing.




________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Leonard Berkowitz via Healeys <healeys at autox.team.net>
Sent: Wednesday, August 27, 2025 3:50:01 PM
To: healeys at autox.team.net <healeys at autox.team.net>
Subject: [Healeys] Advice and guidance needed for OD reinstallation

Hi. All
I finally figured out how to get the OD out of my BJ7. Now for getting the new one installed. I found two rings sitting on the output shaft which I believe are fitted to the adapter plate. (See pics attached). The problem is going to be how to keep them in place while maneuvering the new OD into place. I was thinking of using either white lithium grease or wheel bearing grease.
Any suggestions?
Thank you in advance for any help you can offer.

Len Berkowitz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250827/69771a8b/attachment.htm>