[Healeys] Nice car!

Jean Caron vintage_roadster_restoration at hotmail.com
Tue Nov 10 14:33:29 MST 2026


The best way to obtain good results with folding the metal over your bead is to figure out the diameter of your bead and then multiply that number by 2.5 to have the necessary amount of sheet metal to fold over. Once you have that, butt weld your new bead to the old one, clean your weld and fold the metal over. That has worked for me for many years now.

Jean
________________________________
From: michael.salter at gmail.com <michael.salter at gmail.com>
Sent: November 10, 2026 8:29 PM
To: 'Bob Haskell' <rchaskell at earthlink.net>; 'Jean Caron' <vintage_roadster_restoration at hotmail.com>; gradea1 at charter.net <gradea1 at charter.net>; healeys at autox.team.net <healeys at autox.team.net>; 'Bob Spidell' <bspidell at comcast.net>
Subject: RE: [Healeys] Nice car!


“(plus, I haven't figured out how the meld the existing bead with the replacement bead)”.

Doing that correctly takes some skill ! We used to remove the sheet metal but leave the wire then form a new bead over the original wire.

Once the wire has been cut you are faced with a very difficult challenge to produce a joint that won’t crack.



M



From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Bob Haskell
Sent: Tuesday, November 10, 2026 8:29 AM
To: Jean Caron <vintage_roadster_restoration at hotmail.com>; gradea1 at charter.net; healeys at autox.team.net; Bob Spidell <bspidell at comcast.net>
Subject: Re: [Healeys] Nice car!



BAT - 276 auctions closing today.  Their daily email didn't show 111 of them.

Bob Haskell

Austin-Healey 3000 roadster registrar



On 11/9/26 20:47, Jean Caron wrote:

Now at $50000.00. Everything happens in the last couple of hours.



Jean



Sent from my Bell Samsung device over Canada’s largest network.

________________________________

From: Healeys <healeys-bounces at autox.team.net><mailto:healeys-bounces at autox.team.net> on behalf of Hank Leach <gradea1 at charter.net><mailto:gradea1 at charter.net>
Sent: Monday, 09 November 2026 17:14:22
To: healeys at autox.team.net<mailto:healeys at autox.team.net> <healeys at autox.team.net><mailto:healeys at autox.team.net>; Bob Spidell <bspidell at comcast.net><mailto:bspidell at comcast.net>
Subject: Re: [Healeys] Nice car!



Great comments and spot on. I have been watching BAT and lately we have had a few good sales. It will be interesting to see what happens to the no reserve-for charity! 100M that is currently about $35K-whats that about? Hank
--------------------

From: "Bob Spidell via Healeys" <healeys at autox.team.net><mailto:healeys at autox.team.net>
Reply-To: "Bob Spidell" <bspidell at comcast.net><mailto:bspidell at comcast.net>
To: <healeys at autox.team.net><mailto:healeys at autox.team.net>
Sent: November 9, 2026 at 8:41 AM PST
Subject: Re: [Healeys] Nice car!
Wholly agree. First thing I look for in a side shot is the slight curve of the bottom rockers; when we restored my BN2 I ordered from Kilmartin because their parts were faithful to the original curve. Another thing that gives a resto away is the wire bead inside the rear wing edges; unfortunately, when I replaced the doglegs on my BJ8 I got aftermarket panels that didn't have the bead. I bought them later but haven't felt compelled enough to redo them (plus, I haven't figured out how the meld the existing bead with the replacement bead).

It's a common fallacy of owners of restored cars that their car is 'worth' what they've put into it, both in dollars and hours. The car is worth what the market will offer, period. I also feel a resto of a Healey is more difficult than the shiny 'restomods' you see on B-J and other auctions. Healeys are a semi-monocoque (unibody) build;  muscle cars are usually body-on-frame, which is a simpler build (also, parts are more available, from Summit and others).

Bob



On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote:

What spoils a lot of otherwise nice cars for me is the line at the bottom of the front fender/wing. The line should have a subtle curve to it, but so many restorers have straightened out that line so it loses it curve. Even the Healey 3000 in the heritage museum at Gaydon has this problem. I guess it’s a lot easier to ignore the curve when repairing the rot at the bottom of the fender…but the replacements from AH spares and others do have the correct line.



Stephen, BJ8



Sent from my iPad







_______________________________________________

Support Team.Net http://www.team.net/donate.html

Suggested annual donation  $12.75



Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys



Healeys at autox.team.net<mailto:Healeys at autox.team.net>

http://autox.team.net/mailman/listinfo/healeys



Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20261110/27daa86e/attachment.htm>


More information about the Healeys mailing list