[Healeys] Nice car!
Bob Spidell
bspidell at comcast.net
Tue Nov 10 21:42:11 MST 2026
Thanks Jean and Michael.
Is it advisable to heat the sheet metal to facilitate folding/wrapping,
or does it warp or damage nearby metal too much?
Bob
On 11/10/2026 1:33 PM, Jean Caron wrote:
> The best way to obtain good results with folding the metal over your
> bead is to figure out the diameter of your bead and then multiply that
> number by 2.5 to have the necessary amount of sheet metal to fold
> over. Once you have that, butt weld your new bead to the old one,
> clean your weld and fold the metal over. That has worked for me for
> many years now.
>
> Jean
> ------------------------------------------------------------------------
> *From:* michael.salter at gmail.com <michael.salter at gmail.com>
> *Sent:* November 10, 2026 8:29 PM
> *To:* 'Bob Haskell' <rchaskell at earthlink.net>; 'Jean Caron'
> <vintage_roadster_restoration at hotmail.com>; gradea1 at charter.net
> <gradea1 at charter.net>; healeys at autox.team.net
> <healeys at autox.team.net>; 'Bob Spidell' <bspidell at comcast.net>
> *Subject:* RE: [Healeys] Nice car!
>
> “(plus, I haven't figured out how the meld the existing bead with the
> replacement bead)”.
>
> Doing that correctly takes some skill ! We used to remove the sheet
> metal but leave the wire then form a new bead over the original wire.
>
> Once the wire has been cut you are faced with a very difficult
> challenge to produce a joint that won’t crack.
>
> M
>
> *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Bob Haskell
> *Sent:* Tuesday, November 10, 2026 8:29 AM
> *To:* Jean Caron <vintage_roadster_restoration at hotmail.com>;
> gradea1 at charter.net; healeys at autox.team.net; Bob Spidell
> <bspidell at comcast.net>
> *Subject:* Re: [Healeys] Nice car!
>
> BAT - 276 auctions closing today. Their daily email didn't show 111
> of them.
>
> Bob Haskell
> Austin-Healey 3000 roadster registrar
>
> On 11/9/26 20:47, Jean Caron wrote:
>
> Now at $50000.00. Everything happens in the last couple of hours.
>
> Jean
>
> Sent from my Bell Samsung device over Canada’s largest network.
>
> ------------------------------------------------------------------------
>
> *From:*Healeys <healeys-bounces at autox.team.net>
> <mailto:healeys-bounces at autox.team.net> on behalf of Hank Leach
> <gradea1 at charter.net> <mailto:gradea1 at charter.net>
> *Sent:* Monday, 09 November 2026 17:14:22
> *To:* healeys at autox.team.net <healeys at autox.team.net>
> <mailto:healeys at autox.team.net>; Bob Spidell
> <bspidell at comcast.net> <mailto:bspidell at comcast.net>
> *Subject:* Re: [Healeys] Nice car!
>
> Great comments and spot on. I have been watching BAT and lately we
> have had a few good sales. It will be interesting to see what
> happens to the *no reserve-for charity! *100M that is currently
> about $35K-whats that about? Hank
> --------------------
>
> From: "Bob Spidell via Healeys" <healeys at autox.team.net>
> <mailto:healeys at autox.team.net>
> Reply-To: "Bob Spidell" <bspidell at comcast.net>
> <mailto:bspidell at comcast.net>
> To: <healeys at autox.team.net> <mailto:healeys at autox.team.net>
> Sent: November 9, 2026 at 8:41 AM PST
> Subject: Re: [Healeys] Nice car!
> Wholly agree. First thing I look for in a side shot is the slight
> curve of the bottom rockers; when we restored my BN2 I ordered
> from Kilmartin because their parts were faithful to the original
> curve. Another thing that gives a resto away is the wire bead
> inside the rear wing edges; unfortunately, when I replaced the
> doglegs on my BJ8 I got aftermarket panels that didn't have the
> bead. I bought them later but haven't felt compelled enough to
> redo them (plus, I haven't figured out how the meld the existing
> bead with the replacement bead).
>
> It's a common fallacy of owners of restored cars that their car is
> 'worth' what they've put into it, both in dollars and hours. The
> car is worth what the market will offer, period. I also feel a
> resto of a Healey is more difficult than the shiny 'restomods' you
> see on B-J and other auctions. Healeys are a semi-monocoque
> (unibody) build; muscle cars are usually body-on-frame, which is
> a simpler build (also, parts are more available, from Summit and
> others).
>
> Bob
>
> On 11/9/2026 6:20 AM, Stephen Hutchings via Healeys wrote:
>
> What spoils a lot of otherwise nice cars for me is the line at
> the bottom of the front fender/wing. The line should have a
> subtle curve to it, but so many restorers have straightened
> out that line so it loses it curve. Even the Healey 3000 in
> the heritage museum at Gaydon has this problem. I guess it’s a
> lot easier to ignore the curve when repairing the rot at the
> bottom of the fender…but the replacements from AH spares and
> others do have the correct line.
>
> Stephen, BJ8
>
> Sent from my iPad
>
>
>
> _______________________________________________
>
> Support Team.Nethttp://www.team.net/donate.html
>
> Suggested annual donation $12.75
>
>
>
> Archive:http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
>
>
>
> Healeys at autox.team.net
>
> http://autox.team.net/mailman/listinfo/healeys
>
>
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20261110/81f733c9/attachment.htm>
More information about the Healeys
mailing list