[JAGNUTS] Why won't it work?

[mike scales]

Hi Jeff:  Check the line where it comes out of the tank.  I had a tank
relined once, they did a terriffic job, even sealed up the pickup inside the
tank. I pushed a coathanger through the fitting on the tank, and gas flowed
properly....keep the trouble light and any open flames away, I lost about a
liter of gas before I got the line fitting back on,,,,,,hope this
helps.....good luck....Mike.

----- Original Message ----- 
From: "J. Betcher" <j.betcher@sasktel.net>
To: <jagnuts@autox.team.net>
Sent: Friday, June 09, 2006 4:20 PM
Subject: [JAGNUTS] Why won't it work?


> Hi guys,
>
> I have an update and a question on my MGB.  I have had the gas tank
> cleaned and coated inside and out.  I have installed a new fuel pump and
> reconnected the fuel lines.  A new spin-on oil filter adaptor has been
> installed and I have changed the oil.  After having done this I put
> about 5 litres of gas in the tank and disconnected the fuel line at the
> carbs.  I then connected the battery in order for the fuel pump to pump
> gas through the line.  The pump sounds good and I can feel air pulsating
> out the fuel line but I cant seem to get it to pump fuel.  I tried to
> back prime the line with gas from the carburetor end only to have the
> pump empty it out of the line and pump air once again.  The lines are
> patent as I had gas come from the tank side prior to its removal.  All
> connections are tight and there is no obvious leak.
>
> I am at a loss.  Any ideas?
>
> Thanks
>
> Jeff Betcher
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/359 - Release Date:
> 2006-06-08
> _______________________________________________
> JAGNUTS Regina  -  mailing list
> REPLY TO : Jagnuts@autox.team.net
> http://nonprofits.accesscomm.ca/jagnuts/Jagnuts.htm
> _______________________________________________