[Mg-mmm] FITTING THE J2 PETROL TANK

[Gary Krukoski]

Hi All
Thanks for the help on my tank instillation. Have ordered the needed sheer of
rubber to use on the tank.

Cheers
Gary

--- On Thu, 1/1/09, John James <jj at octagon.fsbusiness.co.uk> wrote:
From: John James <jj at octagon.fsbusiness.co.uk>
Subject: FITTING THE J2 PETROL TANK
To: garykrukoski at yahoo.com
Cc: mg-mmm at autox.team.net
Date: Thursday, January 1, 2009, 12:06 PM

















Gary,

  

The measurements in my previous e-mail were
not clear so I"m repeating them again.

  

The rubber packing is 0.5 inches in
section and 1.25 inches wide.

  

The holes in the rear chassis tube are
16.5 inches between centres (centers). This distance is the same for both the
J2 (and no doubt other Triple-M cars) and the beam axle T-Series models.

  

I confirm that the mounting clamps for the
J-type are identical to the beam axle T-Series models.

  

Regards,

  

JOHN JAMES