[Mg-mmm] Interior For J2 Info Needed
Chris Nowlan
nowlanc at comcast.net
Wed Jan 21 15:40:16 MST 2009
Gary & Sky,
Having retrimmed both my L2 and J2 ( which have virtually identical
interiors) I should be able to help you out.
The fender piping and the interior piping are all nominally 3/8" in dia.
( but really a bit less, more like .320")
The dash piping and the door top piping should be leather ( runs a bit
thicker at .340") The remaining interior piping and exterior wing piping is
vinyl. ( seat piping is much smaller dia )
I had my seats done by Mike Collingburn in the UK and he does an
absolutely superb job even if he is slow. He can also supply the extra
vinyl and both the leather and vinyl piping all made up. He can also supply
the door checks which should be in trim color as well as the speedo
reduction box cover if required ( used on late J2's with Chronometric
speedo's)
The interior of the door is simply covered in vinyl but don't forget
that rubber MG Crests should be centered in the opening before covering.
I can send you both a tracing of my door panel openings which were
copied off of Larry's Longs original door panels.
I can also supply small samples of red leather & vinyl as obtained from
Mike Collingburn. I still had some surviving red leather on the original L2
seats and it was not "antiqued". Having said that, I"ve seen a super
original PA of Dave Jarvis in the UK and his leather is "antiqued" I think
it looks much more appropriate that a solid red color.
Carpets should be the same color as the interior. I was never able to
come up with a documented original pattern but would love to hear some
details if anyone has a pattern.
Cheers,
Chris Nowlan
----- Original Message -----
From: "Schuyler Hoffman" <ssasky at specialtyseals.com>
To: <garykrukoski at yahoo.com>; <mg-mmm at autox.team.net>
Sent: Wednesday, January 21, 2009 4:49 PM
Subject: Re: [Mg-mmm] Interior For J2 Info Needed
> Gary,
>
> I need the exact same info. for my J2. Will be interested in the
> responses.
> Thanks for asking 1st!
>
> Sky Hoffman
>
> -----Original Message-----
> From: mg-mmm-bounces at autox.team.net
> [mailto:mg-mmm-bounces at autox.team.net]On Behalf Of Gary Krukoski
> Sent: Wednesday, January 21, 2009 7:00 AM
> To: mg-mmm at autox.team.net
> Subject: [Mg-mmm] Interior For J2 Info Needed
>
>
> Hi
>
> I'm getting ready to meet with the person that will be doing my interior.
> I
> have several questions you might help me with first.
> What is the diameter of the Piping that fits between the body and rear
> cycle
> fenders?
> Piping size around the Dash and door interior panels?
> Would any one happen to have a small piece of vinyl and or leather in the
> current red color that is being used for the interior?
> Is there a defined inner pocket on the door or is it just open with the
> vinyl glued to the outer skin of the door?
>
> Thanks again for your help
> Gary
> Mg-mmm at autox.team.net
> http://autox.team.net/mailman/listinfo/mg-mmm
>
> You are subscribed as ssasky at specialtyseals.com
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Mg-mmm at autox.team.net
> http://autox.team.net/mailman/listinfo/mg-mmm
>
> You are subscribed as nowlanc at comcast.net
>
> http://www.team.net/archive
More information about the Mg-mmm
mailing list