[Mg-mmm] Spoke Replacement and Wheel Truing
Clive Sherriff
clive.sherriff at ntlworld.com
Sat Feb 13 03:44:07 MST 2010
50 thou (about 1/16 inch) for the "out of round"
seems just about OK, but the 130 thou (1/8 inch),
if thats the best you can get, seems to me to
indicate that the original rim is distorted somehow.
Why 15 inch rims, they are not VSCC eligible for
a pre war MG?
Clive
===========================================
----- Original Message -----
From: "Chris Bucknell" <c.bucknell at bigpond.com>
To: "MMM List" <mg-mmm at Autox.Team.Net>
Sent: Saturday, February 13, 2010 9:48 AM
Subject: [Mg-mmm] Spoke Replacement and Wheel Truing
> Hi All,
>
>
>
> Not getting a lot of help out of the forum in England so far so I thought
> I
> would try you guys.
>
>
>
> I am respoking some 15 inch race wheels for our pre-war Racer. I want to
> know what the out of round tolerance should be and the axial wobble
> tolerance. Hopefully everyone can work out what I am talking about.
>
>
>
> I have a hub mounted on a jig and am able to measure the out of round and
> the axial wobble by a dial gauge.
>
>
>
> I have gotten down to 50 thou for the out of round and 130 thou for the
> axial wobble. At what point is enough enough?
>
>
>
> Chris
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Mg-mmm at autox.team.net
> http://autox.team.net/mailman/listinfo/mg-mmm
>
> You are subscribed as clive.sherriff at ntlworld.com
>
> http://www.team.net/archive
More information about the Mg-mmm
mailing list